Cut Curves in Wood

Wood is a versatile material that’s commonly used for a variety of purposes. Whether its maple, pine, Scandinavian redwood, or cherry, different lumber types can be used for almost any project you have in mind.  

If you’re planning to start your own construction or woodworking project, it’s important to know how much lumber you need before you start working. To know just how much wood it would take to complete your project, consider the following steps.

  1. Start Your Project With a Plan

Ask yourself the question, “what’s the overall size of my project?” By doing this, you’ll have a better idea of the scope and the general size of the project so you can make a rough sketch of your plan. You can get inspiration from a magazine or book with guides on the woodworking project’s dimensions and look.

For example, you want to make an average-sized cabinet for the garage. Now you can take note of the details, like the size of its parts and how much budget you have. These pieces of information will help you narrow down the amount of lumber you need for the entire project!

  1. List Down All the Parts You Need

Once you have a general idea of the project, it’s time to start putting more details into it. You can use a spreadsheet or an old-fashioned notebook and pencil to make your list. To make things more organised, you can make a table where you list down each part of the piece you’re making and lining up the columns with each part’s details. 

To help you with the measurements, you can fill the columns of your chart with the following information:

  • Width
  • Length
  • Rough Thickness
  • Final Thickness
  • Quantity
  1. Know the Right Type and Quality of Wood

Now that you have an idea of wood sizes and board footage, it’s time to choose what type of material to use on your project. Once you visit your local lumberyard, you’ll be able to see a lot of details stamped on the wooden boards themselves. That’s where the lumber grade is stamped, which determines the quality of the wood. A grade 1 lumber will have the least amount of imperfections, which usually comes in the form of splits and knots.

Next is choosing the timber species. Hardwood timber grown in the UK tends to be more variable in appearance than European and American imports. The main types of timber species used are:

  • Softwoods: Softwood timber is one of the most commonly used species because it offers excellent value. They are a bit less dense but more manageable to work with than most hardwoods.
  • Hardwoods: These are mainly broadleaf, deciduous trees, while some hardwoods are evergreen. They are generally more durable than softwoods, but they must be used in the right environment for them to last.
  • Temperate Hardwoods: These are mostly found in more temperate areas around the world. Birch, beech, and air-dried oak are some of the most common temperate hardwoods used in the UK, but they are imported from Europe and North America.
  • Tropical Hardwoods: As opposed to temperate hardwoods, tropical hardwoods are mostly found in tropical areas like South America, Central Africa, and Southeast Asia. You need to be more careful when buying tropical hardwood because of all the illegal trade that’s been going around.

Conclusion

Picking out the right type and amount of lumber for your project requires a lot of research and planning. You’d think getting lumber would be simple, but it’s actually quite a complex process. However, just stick with the types mentioned above, and you’ll be good to go! If you’re still a little uncertain about what to do, don’t hesitate to ask a professional.

Are you looking for a hardwood supplier for your DIY woodworking project? Turn to Timber2UDirect, your online route to cut-to-size timber supplies. We carry a wide variety of wood species available to order. With us on your side, ordering wood online is as easy as 1, 2, 3. Visit our website and order today!