DIY installation for Wooden skirting boards

Have you ever noticed those wooden colour-highlighted boards between the floor and the walls of your home? They are called skirting boards. They are there for a reason, be it for aesthetics or functionality.

Skirting boards are mainly designed to neatly finish off the floor to wall junctions in your home. They are kickboards that serve to protect the wall from possible bumps, knocks, and scrapes, due to foot traffic, moving furniture, vacuum cleaners, and a whole lot more.

Skirting boards also exist to augment and embellish the aesthetic beauty of your home. These highlighted borders can add subtle details to any home, whether the theme of your décor is modern and sleek or intricate and traditional.

Of all the skirting board options, the wooden version is said to be the most coveted and popular. Wooden skirting boards have an elegant, natural, and timeless finish. In the next section, we will provide you with tips on how you can install wooden skirting boards at home.

DIY installation for Wooden skirting boards

It’s easy to choosing wooden skirting boards for your home. Given a wide range of choices, you are sure to find a style that suits your specific needs. If after buying wooden skirting boards you decide to install them yourself, just refer to the steps below.

  • Remove old skirting boards – The first thing to do is to remove the old skirting boards with a hammer and chisel. All you have to do is gently wedge the chisel behind the old skirting board, into the space between it and the wall. Then gently tap the chisel with a hammer to remove the old skirting board from the wall.
  • The area behind – Prior to installing the new skirting boards, you have to make sure that you remove any nails left behind with pliers, and fill up any cracks or chips in the wall with a filler. It is best to finish the wall before the actual installation.
  • Measure up – The next thing you should do is to measure the room so you can be sure that you have enough skirting boards.
  • Cut them to size – Measure the length and width of the area you want to install the new skirting boards in. Then you can go ahead and cut the board into long strips that can fit in this area.
  • Cut 45-degree angles – Cut the ends of each skirting board at a 45-degree angle. This is a must, to ensure that they’ll sit neatly together in the corners of the room.
  • Finish off – After the measurement and the appropriate cuts, you can treat the new wooden skirting boards with your chosen finish. It’s up to you to decide whether you want them painted, stained, or varnished. However, it is recommended that you apply three or four coats for the best finish. Afterwards, you can leave the boards to dry.
  • The final touch – Finally, you can go ahead and have the wooden skirting boards installed on your wall, just right above the floor. Sometimes, they won’t look perfect, as there will be some gaps between the board and the wall. You can fill this with wall filler and sand it down to a smooth finish once it’s dry.

Final Words

Based on the aforementioned steps, the process of installing wooden skirting boards is not that daunting a task. With a little sweat, toil, and creativity, you can ensure that those boards are installed properly. Wooden skirting boards will embellish your walls and augment your home’s overall look and feel.

If you’re looking for a timber supplier in your area, Timber 2 U Direct is your best option. Get in

touch with us today to see how we can help.