Calculate for wall panneling

Panels may come in solid wood, veneers, and composites. However, while wood panelling is perfect in rustic homes, painted panels and beadboards provide attractive accents for decorating techniques.

Determining how many boards you’ll need will depend on which panelling you will use. All calculations are estimates because slopes and crooked corners may lead to the usage of more panels. The safe projection is to buy ten per cent more than what you’ll use.

Tongue-and-Groove Strips

Tongue-and-groove strips are more appropriate for high ceilings. Measure the entire length and height of one side of the wall before multiplying the numbers together for its square footage. Then, add the square footage of each wall panel to calculate the total length. This number will come in handy since tongue-and-groove panels are only available per square foot.

You can subtract the measurements of the windows and the doors, but that makes the equation trickier. The process of calculating for doors and windows is just the same as the walls. Afterwards, subtract the sum area of the windows and doors from the wall to come up with the final square footage.

Panelling sheets

Using a measuring tape, get the total length of each wall in feet. Add the numbers and divide it by four to get a rough calculation of the sheet panelling you’ll need. The division is because sheet panels are often eight feet tall by four feet wide to fit most homes. However, just like the tongue-and-groove, it’s better to buy a little more than what you need. From one panel, you can remove a half panel for the door and one-fourth panel for a window. Adjust the deductions if the windows are not of typical size.

Stock panels may not work if you have high ceilings. Baseboards and crown moulding can compensate for the gap, but it’s better to cut another sheet panel to fit the space. Patching in panel strips at the top and the bottom may work, but only if you can make precise measurements for the gap fillers.

Improving angled walls

Pairing angled ceilings with wooden panels will improve the elegance of the space. However, the wood wall is the focal point because it’s where you mount the panels either horizontally or vertically. Playing with the wood’s texture or colour will enhance the wall, while teak panelling is a great option to impart your personal touch. Draw the shape of a wall on a paper and list down all the measurements taken. Again, it’s better to buy more than what’s needed to avoid any shortages of panels.

Order pre-cut timber

Whether you’ll need tongue-and-groove or panelling sheets, it’s best to purchase them from Timber2UDirect. This company is one of the leading timber traders in the United Kingdom and has been operating for nearly six decades already. With over 50 species of hardwood in stock, they can pinpoint the specific type of wood to fit your requirements and cut them according to your measurements.

Each piece is slightly overcut to prevent running out of wood while your ordered timber is wrapped to avoid scuffing. Whether you’re looking for softwoods, temperate hardwoods, or tropical hardwoods, Timber2UDirect is your timber supplier. Get in touch with us to see how we can help.